|
T
i t a n 2 3 0 |
|
|
F
e a t u r e s |
• User-Friendly, Menu-Driven LCD Screen -
fully programmable backgauge control with 99 channels, 9,801 total cut
memory
• Variable Mode Data Entry - fraction, decimal, metric
• 23” Cutting Width – allows the operator to turn 12” x 18” and
European A3 parent sheet sizes inside the clamp opening
• LED Line Light Cut Position Indicator
• Table Slot Closure Device
• Hydraulic Cutting & Clamping – motor runs only during
cutting cycle
• Rugged Steel & Cast Iron Construction
• Heavy Duty Casters For Portability
• Two-Year WarrantySafety Features
• Conforms to CE and ANSI B65.3-2001 Safety Specifications
• Two-Hand Cut Buttons to Activate Cutting Cycle – timed,
non-repeat
• Cutting Area Protection – light beam safety curtain
• Independent Mechanical Foot Pedal Clamping
• Plexiglas Rear Table Safety Cover
• Computer Diagnostics & Error Indication |
|
S
p e c i f i c a t i o n s |
| Maximum Cutting Width: |
23" / 58.4cm |
| Minimum Cut: without false clamp plate |
1/2" / 13mm |
|
with false clamp plate |
1-7/8" / 48mm |
| Maximum Cut Depth: |
24" / 61.0cm |
| Clamp Opening: without false clamp plate |
3-1/4" / 8.3cm |
|
with false clamp plate |
3" / 7.6cm |
| Clamping Method |
Hydraulic and Manual |
| Backgauge Control |
Power |
| Table Space: in front of knife |
24-1/4" / 61.6cm |
|
behind knife |
24" / 61.0cm |
| Overall Height |
53" / 135cm |
| Overall Width |
50" / 127cm |
| Overall Length |
66" / 168cm |
Will Pass Through Opening:
Without light beams & switch
Table & Treadle out |
39" / 99cm
29" / 73.7cm |
| Net Weight (approximate) |
1,000 lbs / 454 kg |
| Shipping Weight (approximate) |
1,120 lbs / 508 kg |
1-3/4 H.P. 1 Phase, 60 Hz, AC
208/230 Volts, 12 Amps (service size 15 Amps)
Requires receptacle type: NEMA 6-15R or 6-20R
U.L. Listed |
|
Challenge reserves the right to make changes to any
product or specification without notice and without incurring responsibility
to existing units.
|
|
A
d d i t i o n a l R e s o u r c e s |
|
|
|
|
