Champion 305

 

Champion 305 XT shown

 

Click to see picture:

Champion 305 X

Champion 305 XG

 


Demonstration Video

 

The Challenge Champion 305 XG continues our well known excellence for innovation, reliability and durability. The cast iron arch, base, and table are at its’ foundation. UHMW gib surfaces and composite bushings require virtually no maintenance for years of trouble-free operation. Standard features such as power soft clamp, air table, digital hand wheel, and automatic false clamp detection reduce operator fatigue and maximize productivity.

The Champion 305 meets the toughest safety standards in the industry today. Category 4 light safety curtains, enclosed rear table, two-hand timed non-repeat cut buttons, and a knife safety latch contribute to our UL and CE certification.

The intuitive menu-driven controller allows variable mode data entry with up to 99 jobs / 9,801 total cut position storage. Advanced label cutting and the sheet division assistant allows for even the most novice operator to program complex jobs. Industry-leading electronic clamp pressure control can be programmed per cut within a job – minimizing waste. Machine self-diagnostics and error indication walk the operator through any difficulties.

Proudly manufactured in the USA, the Champion 305 continues our legacy of providing… assurance you made the right decision.

 

  • Up to 26 cuts per minute
  • Virtually maintenance-free design
  • Fully-adjustable knife bar gibs (front and rear)
  • Trim business cards with the false clamp plate installed – reducing unwanted waste
  • Electronically-adjustable and programmable clamp pressure
  • Low-pressure pre-clamping protects operator from injury (less than 66 PSI)

 

 

Specifications

Maximum Cutting Width: 30-1/2" / 77.5cm
Minimum Cut: without false clamp plate 3/4" / 19mm
                          with false clamp plate 2" / 5cm
Maximum Cut Depth: 30-1/2"/ 77.5cm
Clamp Opening: without false clamp plate 4" / 10.2cm
                             with false clamp plate 3-3/4" / 9.5cm
Clamping Method Hydraulic and Manual
Maximum Clamping Force 5000 lbs / 2200 daN
Backgauge Control Power and Manual
DIMENSIONS
Table Space:  in front of knife 25" / 63.5cm
                         behind knife 30-1/2" / 77.5cm
Table Height 36-1/2" / 94cm
Overall Height 58-1/2" / 147cm
Overall Width (with side tables) 78-1/2" / 200cm
Overall Width (without side tables) 48-1/2" / 123cm
Overall Length 70" / 178cm
Mounting Dimension 41-1/2" / 105cm
Door Pass-through: assembled 49" / 124cm
        with table/treadle removed 42" / 106cm
        with table/treadle/power unit removed 29" / 74cm
Net Weight (approximate) 2550 lbs / 1157 kg
Shipping Weight (approximate) 2750 lbs / 1247 kg
ELECTRICAL
Standard Motor -

5 H.P. Three Phase, 60 Hz, AC
208/230 Volts, 25 Amps (service size 40 Amps) or
460 Volts, 11.5 Amps (service size 20 Amps)
U.L. Listed

Optional Motor -

5 H.P. Single Phase, 60 Hz, AC
208 Volts, 47 Amps (service size 60 Amps) or
230 Volts, 43 Amps (service size 60 Amps)
U.L. Listed

Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.

 

Additional Resources

Champion 305 & 370 Product Literature:
(click filename to view, right click & "save target as" to download)
Champion_305_370.pdf
Champion 305X Product Literature:
(click filename to view, right click & "save target as" to download)
Champion_305X.pdf
Champion 305X Product Sheet:
(click filename to view, right click & "save target as" to download)
Champion305X.pdf
Champion 305XG Product Sheet:
(click filename to view, right click & "save target as" to download)
Champion305XG.pdf
Champion 305XT Product Sheet:
(click filename to view, right click & "save target as" to download)
Champion305XT.pdf
Champion 305X, XG, XT Operator's Manual:
(click filename to view, right click & "save target as" to download)
F.254-I-O.pdf
Champion XT - with Safety Eyes Operator Supplement:
305 Serial Numbers 07X1311 & up
370 Serial Numbers 07267 & up
(click filename to view, right click & "save target as" to download)
XT_XT3.pdf
Champion XT - without Safety Eyes Operator Supplement:
(click filename to view, right click & "save target as" to download)
XT_3.03.pdf
Request more information: Click Here

 

 

 

Home | Products | Dealer Locator | About Us | Contact Us